- Values from 1 pF to 10,000 µF in any custom value available
- Stability as good as ±0.01 %/year
- Two-to-five terminal configuration, depending on model
- Excellent TC: as low as 10 ppm/°C
- 3 year warranty included
- Accredited calibration included
- Mechanically stabilized capacitors
- Calibrations available at standard or any custom frequency
- Available in BNC and Binding Posts depending on value
Prices range from $1,314.00 to $7,530.00
The SCA Standard Capacitor series are highly stable cost-effective capacitance standards with low temperature coefficient, low losses and a wide range of values of 1 pF - 10,000 µF.The cost and flexibility make this our most popular capacitance standard.
- Inexpensive solution for calibration of LCR meters
- Ideal for calibration of precision LCR meters where MU of better than 0.02% is required
- 1 pF to 10 pF, are made from precision air capacitors
- 100 pF to 1 µF, are constructed of silvered mica capacitors of very high stability
- above 1 µF, are made with hermetically sealed metallized polypropylene sulfide
- Typical capacitors, observed over decades, have shown random fluctuations of less than + 0.01% in measured capacitance with no evidence of systemic drift.
- The capacitors are available with a variety of connectors such as bnc, and binding posts.
- Connection via 4-terminal bnc pair, similar to the Keysight 16380C Capacitance Standard Set, is also available for direct connection to many LCR meters
IET Labs has designed the SCA-1nF-8588A to calibrate the Fluke 8588A 1 nF capacitance range as discussed in the Verifying the capacitance function of the 8588A Reference Multimeter Applications Page.
The 1 nF range in the Fluke 8588A is the only range that does not use a resistance range and can be checked/calibrated with the SCA-1nF-8588A. The other capacitance ranges can be monitored by observing the change in the appropriate resistance range.
The SCA-1nF-8588A is delivered with an accredited certificate of calibration with calibrated values of capacitance at 50 Hz and 1 kHz using an AH2700A Capacitance Bridge.
Basic Specifications for SCA Standard Capacitors
(Full Specifications can be found on the datasheet)
Calibration:An accredited certificate of calibration is provided with each unit
Nominal value | Model | Adjustment to nominal | Temperature coefficient (ppm/°C) | Calibration* frequency | Dissipation (typical) | Stability(per year) | Terminals | Capacitor Type |
1 pF | SCA-1pF | ±0.1% | +20 to +40 | 1 kHz | 0.002 | ±0.1 pF | 2 bnc + gnd | Air capacitors |
1.9 pF | SCA-1.9pF | ±0.1% | +20 to +40 | 1 kHz | 0.002 | ±0.1 pF | 2 bnc + gnd | Air capacitors |
10 pF | SCA-10pF | ±0.1% | +20 to +40 | 1 kHz | 0.002 | ±0.1 pF | 2 bnc + gnd | Air capacitors |
19 pF | SCA-19pF | ±0.1% | +20 to +40 | 1 kHz | 0.002 | ±0.1 pF | 2 bnc + gnd | Silvered Mica |
100 pF | SCA-100pF | ±0.1 pF | 20 | 1 kHz | 0.0005 | ±100 ppm | 2 bnc + gnd | Silvered Mica |
190 pF | SCA-190pF | ±0.1 pF | 20 | 1 kHz | 0.0005 | ±100 ppm | 2 bnc + gnd | Silvered Mica |
1 nF | SCA-1nF | ±0.02% | 20 | 1 kHz | 0.0003 | ±100 ppm | 2 bnc + gnd | Silvered Mica |
1.9 nF | SCA-1.9nF | ±0.02% | 20 | 1 kHz | 0.0003 | ±100 ppm | 2 bnc + gnd | Silvered Mica |
10 nF | SCA-10nF | ±0.02% | 20 | 1 kHz | 0.0003 | ±100 ppm | 2 bp’s + gnd | Silvered Mica |
19 nF | SCA-19nF | ±0.02% | 20 | 1 kHz | 0.0003 | ±100 ppm | 2 bp’s + gnd | Silvered Mica |
100 nF | SCA-100nF | ±0.02% | 20 | 1 kHz | 0.0003 | ±100 ppm | 2 bp’s + gnd | Silvered Mica |
190 nF | SCA-190nF | ±0.02% | 20 | 1 kHz | 0.0003 | ±100 ppm | 2 bp’s + gnd | Silvered Mica |
1 μF | SCA-1μF | ±0.02% | 20 | 1 kHz | 0.0002 | ±100 ppm | 2 bp’s + gnd | Silvered Mica |
1.9 μF | SCA-1.9μF | ±0.02% | 20 | 1 kHz | 0.0002 | ±100 ppm | 4 bp’s + gnd | Silvered Mica |
5 μF | SCA-5μF | ±0.02% | ±50 | 1 kHz | 0.0005 | ±200 ppm | 4 bp’s + gnd | MPPS |
10 μF | SCA-10μF | ±0.04% | ±50 | 100 Hz | 0.0005 | ±200 ppm | 4 bp’s + gnd | MPPS |
19 μF | SCA-19μF | ±0.04% | ±50 | 100 Hz | 0.0005 | ±200 ppm | 4 bp’s + gnd | MPPS |
100 μF | SCA-100μF | ±0.05% | ±50 | 100 Hz | 0.001 | ±500 ppm | 4 bp’s + gnd | MPPS |
190 μF | SCA-190μF | ±0.05% | ±50 | 100 Hz | 0.001 | ±500 ppm | 4 bp’s + gnd | MPPS |
1,000 μF | SCA-1000μF | ±0.4% | -150 | 100 Hz | 0.001 | ±500 ppm | 4 bp’s + gnd | MPPS |
5,000 μF | SCA-5000μF | ±2% | -150 | 100 Hz | 0.001 | - | 4 bp’s + gnd | Polypropylene |
10,000 μF | SCA-10000μF | ±2% | -150 | 100 Hz | 0.001 | - | 4 bp’s + gnd | Polypropylene |